[. . . ] Accessories Please confirm that only the following accessories are included. com MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. €œMade for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. [. . . ] If you want to check the programmed tracks, press the MEMORY button repeatedly. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button. Direct track search By using the numeric buttons, the desired tracks on the current disc can be played. Use the numeric buttons on the remote control to select the desired track while playing the selected disc. When selecting number 10 or higher, use the “+10” button. For example, to choose 13 1 Press the “+10” button. 2 Press the “1” and then “3” button. For example, to choose 130 1 Press the “+10” button twice. 2 Press the “1” , “3” and “0” button. Notes: A track number higher than the number of tracks on the disc cannot be selected. Programmed play (MP3/WMA) 1 While in the stop mode, press the MEMORY button to enter the programing save mode. Or ) button on the remote Press the PRESET ( control to select the desired folder. Or button on the remote control Then press the to select the desired tracks. Repeat play Repeat play can play all 5 discs, all tracks on a chosen disc, single track on a chosen disc, or a programmed sequence continuously. To repeat all tracks on up to 5 discs: (CD Press the PLAY MODE button 3 times. To repeat desired tracks: Perform steps 1 - 6 in “Programmed play” section on page 8 and then press the PLAY MODE button. Press the PLAY MODE button again until “ 2 3 4 5 6 To cancel the programmed play mode: (CD ) During programmed stop mode, press the button. The display will show “MEM CLEAR” and all the programmed contents will be cleared. Adding tracks to the program: If a program has been previously stored, the “MEMORY” indicator will be displayed. If you press the ON/STAND-BY button to enter the stand-by mode or change the function from CD to another, the programmed selections will be cleared. Random play The tracks on the disc(s) can be played in random order automatically. To random play all tracks on up to 5 discs: Press the PLAY MODE button for 2 seconds on the remote (CD ) button. [. . . ] If a power failure occurs during playback, the heads remain engaged with the tape. Headphones Before plugging in or unplugging the headphones, reduce the volume. If problem occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. [. . . ]